Ultrasonic pipe cleaning is an efficient, environmentally friendly and economical pipe cleaning technology, which uses the vibration effect of ultrasonic to peel, break, clean and remove the dirt inside the pipe.

This paper expounds the specific methods and advantages of ultrasonic pipe cleaning from three angles of principle, application and skill, aiming at providing readers with comprehensive knowledge of pipe cleaning.

I. Principle

Ultrasonic pipe cleaning is the use of high-frequency ultrasonic energy, through the vibration and friction between the cleaning fluid and the surface of the pipe, the local high temperature and high pressure, so that the dirt in the pipeline is removed and stripped. The vibration effect of ultrasonic wave can not only clean the inside of the pipeline, but also clean the outside of the pipeline, improving the cleaning efficiency and effect. Ultrasonic pipe cleaning can effectively solve the problems that traditional cleaning methods cannot achieve, such as dead corners, small pipe diameter, difficult to disassemble and other problems, and has the advantages of high cleanliness, environmental protection, efficiency and so on.

Ii. Application

1, chemical cleaning

Ultrasonic pipe cleaning has been widely used in the field of chemical cleaning, which can solve the problems of thermal cracking and sediment in the pipeline, and can also be used for cleaning and rust removal of chemical equipment.

2, chemical cleaning

Ultrasonic pipe cleaning is a chemical cleaning method, widely used in semiconductor, electronics, coatings, paints and other fields, can quickly and effectively remove the chemical substances and oxides in the pipe.

3. Oil tank cleaning

Ultrasonic pipe cleaning can effectively clean the inside of the oil tank, remove dirt such as oil film, and also facilitate the next step of maintenance and overhaul.

4. Clean and replace before fire removal

For pipe cleaning that requires hot removal, ultrasonic pipe cleaning is a very reliable cleaning method. It can effectively remove the oil and other dangerous substances in the pipeline, and create a safe working environment for hot demolition.

3. Skills

1, the choice of cleaning agent

The choice of cleaning agent not only directly affects the cleaning efficiency and effect, but also has a certain impact on the environment. Therefore, when choosing a cleaning agent, it is necessary to combine the actual situation and rationally choose a green cleaning agent.

2. Reasonable grasp of cleaning time

The length of cleaning time directly affects the cleaning effect, too short will waste resources, and too long will increase costs. When cleaning, it is necessary to reasonably grasp the cleaning time and choose the best cleaning efficiency.

3, cleaning liquid concentration control

The concentration of the cleaning liquid is too high, which can easily lead to the liquid level in the pipeline rising or even producing bubbles, and the concentration is too low, which can lead to poor cleaning effect. Therefore, when cleaning, it is necessary to reasonably control the concentration of the cleaning solution.

Conclusion:

Ultrasonic pipe cleaning is a kind of high efficiency, environmental protection and economic pipe cleaning technology, which has a wide application prospect. In practical application, we need to combine the actual situation, reasonable choice of cleaning agent, grasp the cleaning time and control the concentration of cleaning solution, in order to achieve the best cleaning effect.

Ginpertec has 13 years of professional chemical cleaning, oil tank cleaning, hot demolition before cleaning replacement, chemical equipment before putting into operation cleaning, polysilicon cleaning, chemical cleaning and pipeline cleaning and other fields, deep ploughing, to provide customers with more comprehensive and more professional cleaning services.